This Version of Internet Explorer Is Not Supported

We recommend you upgrade to a more modern browser.

Some options are Google Chrome and Firefox.
After physically connecting the Wi-Fi Broadband Connector to the receiver, follow these instructions to properly configure

Configure Wi-Fi Broadband Connector

1. "Attention 396" will display automatically. Select "Wizard"

2. Select the desired wireless network (from the list on the "SSID Scan" screen) and select "Next"

3. Enter wireless network password (WEP or WPA encryption key) and select "Done"

4. The receiver will complete a network connection test
  1. If the test fails, select "Home," then "Wizard" to re-enter the desired wireless network and network password. If the problem persists, visit to troubleshoot.

  2. If the test is successful, select "Home" to go to the "USB Wireless" screen

5. The "USB Wireless" screen will display the signal strength. If it is not above 40, attach the USB extension cable and move to a different location to acheive stronger signal. Select "Close"


Test Wi-Fi Broadband Connection

1. Press the MENU button on the remote
2. Select "Broadband Setup"
3. Select "USB Wireless"
4. The screen will advise the user of the connection status, and strength
  1. If the connection has failed, visit to troubleshoot

  2. If the receiver is connected, select "Close"