After physically connecting the USB Digital OTA Tuner follow these instructions to properly configure.
Configure USB Digital OTA Tuner
| 1. | Press the MENU button |
|
| 2. | Select "Settings" |
|
| 3. | Select "Diagnostics" |
|
| 4. | Select "Over the Air Locals"
|
|
| 5. | Select "Scan Locals"
The scan can take up to five minutes to complete. When the scan is complete, the results show how many digital over-the-air channels were found.
| The receiver will scan for local channels
 |
| 6. | A list of local channels found should be displayed. Select "Save."
|
|
